Coir Pith Coir Mix Coir Fiber Husk Chips Quality Applications International Buyers Market About Contact Português (PT)
QUALITY AND TRACEABILITY

Quality control

Every lot produced goes through five bench tests, with the results printed and traceable by QR code. Analysis per lot. Lot analysis report with EC, pH, moisture, bulk density and particle size. QR lot traceability on every package.

HOW IT WORKS

How the guarantee works

Six steps between the husk arriving at the plant and the bag leaving for the customer. No lot skips a step, and no lot outside the contracted standard is shipped.

  • 01
    Intake
    Husk arrives at the plant. We check moisture and origin, and record the supplier, date and condition. Husk outside the working moisture range goes to drying before processing.
  • 02
    Processing
    Mechanical shredding in the decorticator, then separation on the rotary screen with a ~4.13 mm mesh. Coir pith (fine fraction) and long fiber (retained fraction) are separated and routed to packing. No chemicals, no additives.
  • 03
    Bench testing
    Before packing, we measure five lot parameters: electrical conductivity (EC, 1:5 method), pH, moisture (% wet basis), bulk density (kg/m³) and particle size by visual inspection. Each test is filmed and the result is recorded in the lot system.
  • 04
    Release decision
    The lot is compared against the customer's acceptance limit. If the result is within the contracted standard, the lot is approved for packing. If it is outside, the lot does not ship.
  • 05
    Packing and labelling
    Every bag receives a label with the lot QR code. The code opens the lot analysis report with the actual results, the origin of the husk and the production date.
  • 06
    Dispatch
    Every package carries a QR label linked to the lot analysis report. A package without a label is not dispatched.
WHAT WE MEASURE

Test panel per lot

Five parameters, measured on every production lot, printed on the bag and accessible by QR code.

Parameter Method Frequency Published?
EC (electrical conductivity) 1:5 (v/v) extraction, calibrated conductivity meter Every lot Yes, printed + QR
pH 1:5 (v/v) extraction, calibrated pH meter Every lot Yes, printed + QR
Moisture Weighing before and after drying Every lot Yes, printed + QR
Bulk density Mass / volume in a graduated container Every lot Yes, printed + QR
Particle size Visual inspection + conformity with the ~4.13 mm mesh Every lot Yes, type recorded

External laboratory reports: periodically, we send lot material to an external laboratory for a full panel, including tannin, organic matter, water holding capacity and mineral analysis. Results available on request.

TRACEABILITY

Traceability per lot

Lot
CRV-PO-20260810-032
EC (1:5)
1.4 mS/cm
pH
5.8
Moisture
15.8%
Bulk density
94 kg/m³
Approved: within the contracted standard

Illustrative example. Every real lot carries its own measured values

By scanning the QR code on the bag, the customer can access:

  • → Results of the lot's five bench tests
  • → Origin of the husk (farm, municipality, collection date)
  • → Processing date
  • → Photo or video of the bench test
7/10

Of the 10 Brazilian coir substrate processors we studied, 7 publish no technical specification at all.

  • Lot analysis report

    We do not publish catalogue ranges that do not come from real measurement. Our product is natural and it varies. What we guarantee is that you know exactly what you are receiving, lot by lot.

  • Consistency between lots

    The acceptance limit is fixed in your contract. If the lot does not meet it, it does not ship. Parameters monitored lot by lot. Variation outside the agreed range is held back.

  • Open data

    Documented test. Result in the lot analysis report. QR code linked to the package. Report available to the customer at any time.

Would you like the full technical data sheet?

We send the technical data sheet for our products by WhatsApp or email. It includes specifications, product photos and a sample lot analysis report.

WhatsApp Email Sales